|
|
Post by 238 on Apr 14, 2020 11:24:50 GMT -5
I have a MKlll Transmitter that someone has added a kit to give it the chs above 23. I removed one before, but i had a junk one to go by. What i need is the instructions or a copy of them, so i can see what they changed. You either post them or email me. Thanks 238
|
|
Sandbagger
Administrator/The Boss 
Posts: 6,247 
|
Post by Sandbagger on Apr 14, 2020 17:59:11 GMT -5
I have a MKlll Transmitter that someone has added a kit to give it the chs above 23. I removed one before, but i had a junk one to go by. What i need is the instructions or a copy of them, so i can see what they changed. You either post them or email me. Thanks 238 That's going to be tough as every tech has his own way of installing mod kits. So it will be equally difficult figuring out how to undo it without seeing it up close and personal. |
|
|
|
Post by 238 on Apr 15, 2020 13:08:14 GMT -5
What i was hunting is the original instructions that came with this these kits. The kits where sold by H.F.International Englewood, Ca. The other one i had a stock one sitting next to it. I am not planing on taking this out, just wanting to see what the change. The big switch is going out in this radio, an i am wanting to try an by past it. An wire it for am only. I know it has been done so i want to try it. 238
|
|
|
|
Post by 238 on Apr 25, 2020 21:31:48 GMT -5
Fixing to try an by past the mode switch in a MKlll transmitter. So i can use in AM only.This is the early transmitter with out the ALC pot mounted in the deck. 238
|
|
dms
Mudduck
Posts: 3
|
Post by dms on Nov 27, 2020 20:44:59 GMT -5
did you ever fine the 23 kit yet for the bge m3 let me if u did email me at hiband813@aol.com Dennis
|
|
|
|
Post by 238 on Jan 26, 2021 10:35:37 GMT -5
Just seen this post. Was not hunting the kit, just the instructions. So i could see what they changed. I am going to remove kit. Jim/238
|
|
