|
Post by beachcomber1 on Feb 10, 2021 10:32:04 GMT -5
Looking for any and all info on a Lafayette HB-333. An owners manual and a schematic would be nice Thanks Beachcomber1
|
|
|
Post by crazybob on Jan 20, 2023 16:56:58 GMT -5
The HB-333 was made by Polycomm, in New Jersey until 1964. It was replaced by the HB-400 made in Japan. Both had 13 tubes, including nuvisyors. I have several parts radios. Crazy Bob
|
|
|
Post by dk039 on Mar 29, 2023 21:26:54 GMT -5
Beachcomber1: I was doing some research for a Lafayette HB-333(a) that I recently acquired, and came across your post on this forum. Which HB-333 do you have? I have a copy of the original "Operating and Installation Instructions" manual for the HB-333(a) variant, the later production of that radio. It includes the schematic and alignment instructions. The only outward sign of the late production units that I can see between the -333 and -333(a) is the fuse holder on the rear chassis apron (on the right corner when looking at the radio from the rear). The front panels look identical.
|
|
|
Post by dk039 on Mar 29, 2023 23:13:46 GMT -5
Beachcomber1: I was doing some research for a Lafayette HB-333(a) that I recently acquired, and came across your post on this forum. Which HB-333 do you have? I have a copy of the original "Operating and Installation Instructions" manual for the HB-333(a) variant, the later production of that radio. It includes the schematic and alignment instructions. The only outward sign of the late production units that I can see between the -333 and -333(a) is the fuse holder on the rear chassis apron (on the right corner when looking at the radio from the rear). The front panels look identical. Crazybob: I noticed your post that said you had several HB-333 parts radios. To do a decent restoration on my HB-333(a), I would like to know if you happen to have an original ceramic mic for that rig, and an original mobile mounting bracket/handle for that radio?
|
|