|
Post by cadillaccharlie on Oct 23, 2021 21:09:17 GMT -5
Hi all, I am restoring a Sampson R-101 A Receiver & a T-110A Transmitter. I have them both working and I am going to check alignment on the receiver. I have the Sam's PhotoFact on both units but it does not tell you how to set the channels that you want to use. The tuning dial has all the 23 channels across the dial with a set mark in the middle of the dial. It has no crystals except for a 37.795 crystal for the oscillator. It has a dial that you can set at WWV Xtal Tune then A B Or C Channel presets. I can set those to a desired channel via a signal generator but I cant get the tuning capacitor to tune stations across the dial using a signal generator as a channel signal source. Any help as always will be greatly appreciated.
Dave
|
|