darknuss
Mudduck
The world is a cold free toilet..
Posts: 24
|
Post by darknuss on May 3, 2012 20:17:33 GMT -5
I have an APC model SUA1500 UPS, (uninterruptable power supply). How difficult would it be to convert it to use as a power supply for a DC linear amplifier? The specs are here: www.apc.com/resource/include/techspec_index.cfm?base_sku=SUA1500&tab=modelsOutput at AC outlets is 1440VA, whatever that means lol lol lol. I'm hoping it can be done to save some stamps I can put to use on a big FET box. 3's
|
|
|
Post by cbrown on May 4, 2012 9:03:58 GMT -5
The battery used in that UPS is a 12 volt 18 AH battery. That would maybe power a two transistor 12 volt amplifier for maybe 10 minutes.
|
|
darknuss
Mudduck
The world is a cold free toilet..
Posts: 24
|
Post by darknuss on May 4, 2012 16:07:50 GMT -5
I figure if say 12>24volts DC is used to keep the battery charged how many amperes is it capable of delivering.
3's
|
|
|
Post by cbrown on May 7, 2012 8:52:12 GMT -5
The APC chargers aren't designed to deliver that kind of current, just to recharge the battery pack.
You'd be better off with a power supply, in my opinion.
|
|
darknuss
Mudduck
The world is a cold free toilet..
Posts: 24
|
Post by darknuss on May 9, 2012 13:06:37 GMT -5
I've been doing some research and a better move for me is getting a steel tube linear that's plug and play. Thanks for all the feedback.
3's
|
|
|
Post by cbrown on May 10, 2012 8:52:40 GMT -5
Tube amplifiers are good, but remember they do have to be tuned for use. So they really aren't "plug & play" although tuning isn't that hard once you get it. And they do have to be re-tuned as you move around the band, especially if you go into the freeband area.
|
|