|
Post by thehobo on Aug 7, 2018 11:56:27 GMT -5
say hey, ive got a 1011 siltronex that i need a manual, and the plastic batwings that goes over the metal finger on the switches.. need 4 of them plus the wireing digram for a d104 4 wire mike to the radio, any help, thanks
thehobo
|
|
Sandbagger
Administrator/The Boss
Posts: 6,247
|
Post by Sandbagger on Aug 7, 2018 15:39:57 GMT -5
say hey, ive got a 1011 siltronex that i need a manual, and the plastic batwings that goes over the metal finger on the switches.. need 4 of them plus the wireing digram for a d104 4 wire mike to the radio, any help, thanks thehobo Here's a link to manuals: www.cbtricks.com/radios/siltronix/model_1011d/index.htm
|
|
|
Post by SIX-SHOOTER on Aug 8, 2018 11:11:50 GMT -5
say hey, ive got a 1011 siltronex that i need a manual, and the plastic batwings that goes over the metal finger on the switches.. need 4 of them plus the wireing digram for a d104 4 wire mike to the radio, any help, thanks thehobo I am a bit confused about the post? Heading says dak switch handles but the post says Siltronix 10011? Wiring diagram for which radio? Siltronix or a DAK & if for a DAK which one since there are several base & mobile models? SIX-SHOOTER
|
|
|
Post by cbrown on Aug 8, 2018 12:48:54 GMT -5
say hey, ive got a 1011 siltronex that i need a manual, and the plastic batwings that goes over the metal finger on the switches.. need 4 of them plus the wireing digram for a d104 4 wire mike to the radio, any help, thanks thehobo The 1011C requires a Hi-Z microphone; any amplified microphone should be okay to use with it. Wiring for the Astatic microphone to the plug is: TUG-8:1) Make sure switch in base of microphone is set to R (relay)White - Ring Shield & Black - Sleeve Red - Tip TUG/TUP-9:White - Ring Shield & Blue - Sleeve Red - Tip
|
|