buck
Mudduck
Posts: 10
|
Post by buck on Sept 14, 2010 19:10:39 GMT -5
One of my hunting buddies had an older 3300hp that must have been worked on at the supper market, it was butchered ! anyway it's something to play around with, lots of power but someone had turned on the receiver alignment. got it back close, had to bypass the echo board to get to tx and rx but the audio output vol. is not half of what it should be. would bypassing this have anything to do with it ? Can't find a schematic or receiver alignment for this radio on the web. any help would be appreciated thanks.
|
|