|
Post by KneeBiter on Jun 3, 2013 17:50:23 GMT -5
RCI 2970 with the orange display. One of the originals. Want to put a line out jack on the radio for the receive audio.
I want to put a small jack on the radio that when plugged into it would send line level audio out to a separate source like an amp or recorder.
Do not want the volume control to affect it. So I need a direct out from the receive audio.
Any help with where I need to tap off on the board would be a great help.
Thanks
|
|
|
Post by Timekeeper on Jan 10, 2014 18:01:41 GMT -5
kneebiter - you should be able to get line out audio at the junction of r52,r70,Q17, and ground. Be cautious!
|
|
|
Post by KneeBiter on Jan 10, 2014 18:23:32 GMT -5
Thanks for the reply. Got it figured out a while back. Tapped off the line audio at the volume control.
|
|
|
Post by Timekeeper on Jan 10, 2014 18:50:29 GMT -5
Ha! Well, or THAT if you want to be lazy about it.
|
|