Post by 3pinplug on Feb 26, 2023 5:18:33 GMT -5
Hi all
My radio reads as follows on TX onCH20 (27.205mhz):-
AM = 27.20558mhz
USB = 27.20719mhz (+0.00219mhz)
LSB = 27.20392mhz (-0.00108mhz)
So quite a different offset between Upper and Lower sideband from the AM frequency (clarifier in centre position for all readings) anyone know what the exact offset should be for the Royce 1-642 USB /LSB offset as was expecting this to be the same?
Also for adjustment which CT would i use CT4 & 5?
Hopefully once i get this right i am back up and running!👍
Thanks
Mark
My radio reads as follows on TX onCH20 (27.205mhz):-
AM = 27.20558mhz
USB = 27.20719mhz (+0.00219mhz)
LSB = 27.20392mhz (-0.00108mhz)
So quite a different offset between Upper and Lower sideband from the AM frequency (clarifier in centre position for all readings) anyone know what the exact offset should be for the Royce 1-642 USB /LSB offset as was expecting this to be the same?
Also for adjustment which CT would i use CT4 & 5?
Hopefully once i get this right i am back up and running!👍
Thanks
Mark