|
Post by bobcat4109 on Jul 25, 2024 16:09:56 GMT -5
Hit the "Lucky Button" yesterday!!!! Found a posting in the local Facebook Marketplace that had only been up 16 minutes. A couple full of mobile radios and a few bases, a couple of amps, a couple of rotor control boxes. All for $50. 13 radios in all, 3 amps.
But one thing stands out as a prize..... a Gemtronix GTX-2300. Certainly not in mint shape....but really really good. Not beat up... no rust. Original mic still with it.
I want to get this one cleaned up and working... just to HAVE it working!!!!!!!
I'm hoping the GTX-2300 was a decent radio... I haven't seen a lot of discussion about it.
|
|
|
Post by bobcat4109 on Jul 29, 2024 16:25:56 GMT -5
Went out and made a list of everything that was in the batch, just for pure "wanting to know"........
Radios Cobra 21 (23 channel), Cobra 29 (23 channel), Gemtronix GTX-2300, JC Penny 6247 (40 channel SSB), Johnson 123A (23), Midland 13-862B (23), President Teddy R (40 AM), Realistic TRC-24C (23), Realistic TRC-48 (23 SSB), Royce 1-600 (23), SBE Console V (40 SSB Base), SBE Trinidad (23 AM Base), SBE Trinidad III (40 AM Base)
all pretty old radios!
---- Amps Firebird F100/BM, Firebird 606 (supposedly a one tube amp... but I haven't opened it up to see), Penetrater HB-1000 -------
Meters PDC 600 RF Power Scanner (3 meter) Palomar 500 PWR/SWR meter -------
2 rotor controls(only!) CDE XL-1 (1-720) CDE Ham II/CD44 (1-616)
Two coax switches: 1 3 position, 1 2 posistion
a bunch (sloppy count...maybe 10 ... maybe 12) microphones. A good number are various Turner hand power mics.
and finally, an ugly old Colt Z28 programmable scanner.
Mostly really old stuff but not too bad.
|
|
|
Post by oldgeezer on Jul 30, 2024 3:23:51 GMT -5
Firebird F-100 has pair 6LQ6 and makes 300 watts peak output with healthy tubes.
|
|
|
Post by bobcat4109 on Jul 30, 2024 10:23:01 GMT -5
OG, the weird thing about this is......... it is a really small box it is in. It almost looks more like a bandpass filter. Awfully small to have that much "oomph".
And, I can't find anything at ALL on this model on the web. F100? yes. F100/BM ? Nothing at all.
I will try to go find it in a bit and get a picture or two for you.
|
|
|
Post by bobcat4109 on Jul 30, 2024 10:39:16 GMT -5
Firebird F-100 has pair 6LQ6 and makes 300 watts peak output with healthy tubes. I hope these show up okay. I put the coffee cup and the pair of chopsticks near it to give you an idea of the size we are talking about. This /BM has GOT to be something different from the F100 you mention. ![](https://i.imgur.com/57uxCOd.jpg) ![](https://i.imgur.com/vWfBBvb.jpg) ![](https://i.imgur.com/FFMixwb.jpg)
|
|
|
Post by bobcat4109 on Jul 30, 2024 10:49:39 GMT -5
Firebird F-100 has pair 6LQ6 and makes 300 watts peak output with healthy tubes. Added a couple of internal pics ![](https://i.imgur.com/9dUw3CP.jpg) ![](https://i.imgur.com/AqylbVc.jpg)
|
|
Sandbagger
Administrator/The Boss
Posts: 6,270
|
Post by Sandbagger on Jul 30, 2024 18:56:36 GMT -5
Firebird F-100 has pair 6LQ6 and makes 300 watts peak output with healthy tubes. Added a couple of internal pics ![](https://i.imgur.com/9dUw3CP.jpg) ![](https://i.imgur.com/AqylbVc.jpg) That is a typical amp that has worn many different brand names. That pair of transistors will give you about 120 watts PEP. Drive it so no more than 30 watts AM carrier power. It does appear to have a rudimentary bias circuit, so it should sound acceptably decent on SSB.
|
|
|
Post by cbrown on Jul 31, 2024 12:44:13 GMT -5
Looks like the 10 Ω resistor on the left side of the photo is blown. And I'd check all those caps before I ran it. Neat little box, though.
|
|
|
Post by bobcat4109 on Jul 31, 2024 14:05:19 GMT -5
Looks like the 10 Ω resistor on the left side of the photo is blown. And I'd check all those caps before I ran it. Neat little box, though. I literally never noticed that resistor UNTIL I put this photo up!!!!! I'm glad you mentioned it!!!!
|
|
Sandbagger
Administrator/The Boss
Posts: 6,270
|
Post by Sandbagger on Aug 1, 2024 20:20:20 GMT -5
Looks like the 10 Ω resistor on the left side of the photo is blown. And I'd check all those caps before I ran it. Neat little box, though. I literally never noticed that resistor UNTIL I put this photo up!!!!! I'm glad you mentioned it!!!! I noticed that too, but after closer examination, it looks more like a splash of hardened solder flux rather than a toasted resistor
|
|
|
Post by cbrown on Aug 7, 2024 11:59:27 GMT -5
I noticed that too, but after closer examination, it looks more like a splash of hardened solder flux rather than a toasted resistor Could be, I'd definitely check everything before applying any power to it.
|
|